Olimpia splendid Unico Twin - Remote Control Reset and Unit Power; Resetting Remote Control Settings; Turning the Unit On and Off

ENGLISH
EN - 26
5.3.5 - RESETTING ALL REMOTE CONTROL FUNCTIONS
Press the button T10 to reset all the remote control settings.
By doing so all of the settings of the timer are cancelled and the remote control restores all of the default
settings.
Furthermore, by pressing button T10,allofthesymbolsindicateding."E"willappearonthedisplay,thus
making it possible to check the integrity of the display itself.
5.4 - DESCRIPTION OF THE AIR CONDITIONER FUNCTIONS
• Themachineisequippedwithapowerswitch(10);theswitch(10)mustbepositionedto“I”(g.39)in
order to work.
Press the switch in position “I” to start the appliance.
• Oncetheseoperationshavebeencarriedout,themachinemayberegulatedusingtheremotecontrol.
In order to transmit commands to the indoor appliance, point the front of the remote control toward the
appliance’s control panel.
The device emits a beep when it receives a command.
• Themaximumdistancefromwhichtheappliancecanbecontrolledisabout8meters(withchargedbat-
teries).
5.4.1 - TURNING THE UNIT ON/OFF
• PresskeyT1 on the remote control to activate or deactivate (stand-by) the air conditioner.
The control system of the unit is equipped with memory, for this reason all the settings won’t be lost when
shutting off the appliance itself.
In case of prolonged stop of the machine, it must be deactivated turning the main
switch off or unplugging the machine from the mains.
5.4.2 - OPERATION IN “SPA” MODE ONLY (AUTOMATIC)
• Inthismode,theapplianceautomaticallysetsthemodeofoperation(cooling,ventilationorheating,if
applicable), the system temperature and ventilation speed.
• PresskeyT2 on the remote control to activate this mode.
5.4.3 - OPERATION IN “COOLING” MODE ONLY
• Whenusedinthismode,theairconditionerdehumidiesandcoolstheroom.
• Toactivatethismode,pressseveraltimesthekeyT4 on the remote control until when the symbol U3
appears on its display.
• Inthisrunmode,therequiredtemperatureandfanspeedcanbeset.
After three minutes (maximum time) from the activation of this mode of operation, the appliance starts
supplying cold air.
 TheactivationofthecompressorisindicatedbytheilluminationofthecorrespondingLEDB(g.C)
located on the console.
5.4.4 - OPERATION IN “DEHUMIDIFICATION” MODE ONLY
• Whenusedinthismode,theairconditionereliminatesthehumidityintheroom.
This function can be extremely useful between seasons, particularly on rainy days when the temperature
is not uncomfortable but the excess humidity feels unpleasant.