Olimpia splendid Unico Twin - Wall Unit Control Panel and Manual Operation; Wall Unit Control Panel Notifications; Manual Operation of Wall Unit

ENGLISH
EN - 34
6.2.1 - CONTROL PANEL NOTIFICATIONS
 Theconsoleincludesthenoticationslistedbelow.
OPERATING CONDITIONS DISPLAY LED5 LED1
Stand-by (timer disabled) OFF OFF OFF
Cooling mode 18÷30°C (64÷86°F) ON (blue) x
Heating mode 16÷30°C (61÷86°F) ON (red) x
Dehumidifying mode - - ON (blue) x
FAN only mode - - OFF x
Automatic mode
x x
Timer enabled x x ON
Self-diagnostics function enabled
OFF OFF
WIN contact opening
OFF x
Maximum ventilation speed
x x
Minimum ventilation speed
x x
Low ventilation speed
x x
Automatic ventilation speed
x x
6.2.2 - MANUAL OPERATION
Manual operation can be used temporarily if the remote control cannot be found or its batteries are discharged.
a. Openandliftthefrontpaneltoanangleinwhichitblocksanda“click”isheard(gure40).
b. Pressthecontrolkeyonce(AUTO/OFF)tostartoperationin“AUTO”mode(gure41).
c. Closethepanelwell,takingitbacktoitsoriginalposition(gure42).
• By pressing the manual key, the operating passes in sequence to:
AUTO > COOL > OFF.
• To restore remote control operation, use the remote control directly.