Olivetti d-Color MF201 Service Manual

10. Service Mode Field Service Ver. 1.0 Jun. 2008
212
Adjustment / Setting
NOTE
(*1) SMTP authentication is valid when the following conditions are met:
• MODE 383 Bit 6 is set to “1.”
• One of MODE 383 Bit 5, 4, 3 is set to “0.”
(*2) When all the mail authentications are enabled (Bit 5 to 3 are all “0”), priority is
set as CRAM-MD5 (Bit 5) o LOGIN (Bit 4) o PLAIN (Bit 3)
2-0 Set default relay station for IP relay
Set the default relay sending machine for IP
relay (sending machine).
000 Relay station 1
001 Relay station 2
010 Relay station 3
011 Relay station 4
100 Relay station 5
101 Relay station 6
110 Relay station 7
111 Relay station 8
Bit Setting item
Setting value
Description
01
Mode Default value
383
Bit 7654 3210
HEX: 38
State 0011 1000
Bit Setting item
Setting value
Description
01
6 Mail RX authentication (SMTP).
Disable Enable (*1)
5 Restrict mail authentication (CRAM-MD5). No
Ye s ( * 2 )
4 Restrict mail authentication (LOGIN). No
Ye s ( * 2 )
3 Restrict mail authentication (PLAIN). No
Ye s ( * 2 )
Mode Default value
384
Bit 7654 3210
HEX: FF
State 1111 1111
Bit Setting item
Setting value
Description
01
7 Set TCP/IP
Not use
Use
Specifies whether to use
TCP/IP.
6 Set LPD
Not use
Use
Specifies whether to use
LPD.
5 Set port (RAW port)
Not use
Use
Specifies whether to use
RAW port.
d-Color MF201
Service Manual Y109660-1
d-Color MF201

Olivetti d-Color MF201 Specifications

General

Brand	Olivetti
Model	d-Color MF201
Category	All in One Printer
Language	English