UNIVERSAL
(nun)
BAR AOJUSTMENT (Equalization of Type Bar Trip)
IY120
I
A 5
NOTE: The Universal Bar (4) must be positioned so
that the bosses (A) of a11 the type bars (5) move
the
"un
Bar approximately the same amount
3
4
<>
- Manually raise a typê bar at the right end of the segment to the
type guide and observe when the escapement trip occurs
- 00 the same with a type bar at the left end of the segment, and
at the center
The escapement trip occurs when the type bars
yes
Y169
are about the same distance from the platen
no
- Remove carriage assembly
- Loosen screws (2) and reposition the OU"
Bar (4) by means
of the floating bushings (3) to equal ize the tr ip
yes
\
The IIU" Bar
is free
no
- Loosen screws (2) friction tight, also loosen guide screw (1)
- Reposition the "U" Bar sl
i
çht
ly
to relieve the bind but still
maintain centralization
To Next Page
Loading...
