6
Attach the Backrest (1) to the
Armrest (3). Use the Wrench (12)
to screw Bolts (9) on the left and
right. The installation of the other
side is the same.
Step 6:
Rotate the back of the chair up, then
secure it with the Bolt (9) and use the
Wrench (12). Adjust the balance on
each side of the chair, and 100%
tighten all the bolts at this step.
The installation of the other side
is the same.
Step 7:
7
HJ-Customer-Service@outlook.com
(909)637-7665 | (909)637-7593
50%
(9)×1
(1)
100%
100%
(9)×1
7
All bolts do not need to be tightened, they only need to be fixed in half
To Next Page
Loading...