IMPACT ECHO (IE)
www.olsoninstruments.com www.olsonengineering.com
1. Turn on the NDE-360 system (with the hardware in Section 2.0 connected). Make sure that
the compact flash card is secured in place. The master software to run the system is located
in the compact flash card. Press on the “Continue” button on the upper right corner of the
screen. If the compact flash card is not in place, the “Continue” button will not appear on the
screen.
3.0 IE DATA ACQUISITION
Press on this button to continue
Press on this button to turn on the system
Press on this button to continue
Press on this button to turn on the system
If the continue button disappears from the screen, turn off the system and
insert the compact flash card in place and turn the system on again.
To Next Page
Loading...