Olson Instruments NDE-360 - Initial WinTFS Software Execution

IMPACT ECHO (IE)
www.olsoninstruments.com www.olsonengineering.com
2. Select “Add/Remove Programs”
3. Highlight WinTFS, select “Remove”
4. The uninstall process will begin automatically, removing all installed components including the
shortcut.
If the WinTFS software is executed for the first time, the program detects missing software key
(OlsonWinTFSKey.dat). The program will display a warning that the software key file is missing and
will only enable two options on the main menu. Select the “Software Key” button and then enter the
software key attached to the case of the installation disk. Exit the software and restart the software.
Now the software will detect missing parameter file and then will automatically generate a default file.
The user will notice an applet shown below for the type of acquisition card. Select “No data Acquisition
Card” option to continue.
4.4
First Time Executing the WinTFS Software