IMPACT ECHO (IE)
www.olsoninstruments.com www.olsonengineering.com
5. Pick the frequency echo: At this point, the data can be analyzed. The software automatically
detects the dominant peak, place a cursor on the dominant peak and calculate the corresponding
thickness. However, the user can manually pick the frequency peak by placing the cursor on the
frequency and the software will automatically calculate the corresponding thickness.
6.
Open the next IE data File: For speedy data recall, simply click on the +/- button to open the next
data file.
7. Data Export: The plots can be sent to MS Word for print out. Go to File/Send Plots to MS Word.
Then setup the orientation and figure number and click the OK button.
To Next Page
Loading...