OLT 6x6 Maximizer - Connecting Side and Rear Wall Panels

Do Not Attach Walls To
Floor until Step 28.
16. Position side wall into place on
plywood floor. Butt both vertical wall
frames of side and rear walls together
tight and attach with 3 - 2 1/2” screws
(Part B). Start at top and screw in the
middle and bottom of framing. Screw
on a slight angle into the meat of both
frames.
17. With the corner wall
attachment complete, position
a second side wall panel in
place.
Optional - Caulking
seams will help prevent
moisture from entering at
seam.
Caulking not included in
kit.
Side Wall
Rear Wall
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 12