103. Complete remaining Cupola corner Ridge
Caps as per Steps 100-102 going around in a
windmill design.
104. Locate and place Top Cap / Ball Top on
top of Core Block.
105. Prior to attaching Top Cap / Ball Top to Core
Block, drill pilot holes to prevent splitting of wood.
Once complete, secure with 2 - 2” screws.
106. With your helper, lift completed Cupola
up on top of gazebo roof. Lift Cupola from the
Side Rail Sections.
107. Place Cupola so bottom of Side Rail Section
sits on top of Skybox. See Step 108 for alignment.
108. With Side Rails sitting on Skybox evenly,
secure with 8 - 3” screws from the inside.
Skybox
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 33
Important- Placing
Cupola on Roof requires
heavy lifting. Your helper
will need to be
positioned on the roof.
Pick Cupola up by the
Side Rail Sections only.
To Next Page
Loading...