Olympus 35 ECR - User Manual

Indicates parts supplied as a single piece or an assembled unit. Parts within parentheses are not supplied separately.

Indicates several types of parts for the same position are available, allowing selection of the most suitable one.

Indicates parts differ according to different models and types, used to show various combinations in a picture.

Denotes a left-handed screw. The mate screw hole is not specifically marked.

Indicates parts that should not be touched directly by bare hand due to special surface treatment.

Indicates that a part is not supplied as a repair part.

Used exclusively for black finish models.

Indicates original parts. New or modified ones are not marked this way.

Indicates no more available parts due to design change or out of stock.

A correction mark indicating parts for which this mark is not available.

Indicates modified parts not shown in the manual; the figure indicates the reference page number.

Enters parts position in the technical manual's 'Remarks' column, divided into 16 sections.