40
En
PLAYBACK (Cont.)
Protect (Protecting Images Against Accidental Erasure)
It is highly recommended that you protect important pictures to avoid
accidentally erasing them. Protected pictures cannot be erased by the single-
frame/all-frame erase function.
1 Display the picture you want to protect by using the arrow pad.
2 Press .The picture is now protected.
● To cancel protection, press again.
Single-Frame Erase
1 Select a picture you wish to erase by using the arrow pad.
● If the picture is protected, cancel the protection first.
2 Press .
● The ERASE screen is displayed.
3 Press Ñ to select YES.
● To cancel erasing, select NO and press , or press again.
4 Press to erase the picture.
All-Frame Erase
This function erases all still pictures and movies on the card, except protected
ones.
1 In the top menu, select MODE MENU T CARD T CARD SETUP T
ALL ERASE.
2 Press .
● The ALL ERASE screen is displayed.
3 Press Ñ to select YES.
● To cancel erasing, select NO and press .
4 Press to start erasing.
● A bar is displayed to show the progress.
To Next Page
Loading...
