Olympus CAMEDIA C-730 Ultra Zoom - Page 42

42
En
 Playback on a TV
1 Make sure that the TV and camera power are off .
2 Connect the camera to the TV using the AV cable.
3 Set the mode dial to .Turn on the camera and the TV. Set the TV to
the video input mode.
● For details on switching to video input, refer to your TV’s instruction
manual.
4 Select an image by using the arrow pad.
● The selected image will be displayed on the TV.
Mode dial
setting
PLAYBACK (Cont.)
● Make sure that the camera’s video output signal type is the same as the
TV’s video signal type.
Note
Connect to the A/V OUT jack.
Mode dial
AV cable
Connect to the TV’s video
input (yellow) terminal and
sound input (white)
terminmal