En 13
En
J POWER ON/OFF
1
Press the tabs on the lens cap as
indicated by the arrows and
remove the lens cap.
2 Press the power switch.
• The power turns on and the lens extends
when the mode dial is set to any mode
other than q. The monitor turns on.
• When the mode dial is set to q, the
camera turns on in the playback mode
and the monitor turns on.
3 To turn the camera off, press the
power switch again.
• To save battery power, the camera automatically enters the sleep
mode and stops the operation after about 3 minutes of non-
operation. The camera activates again as soon as you operate the
shutter button or zoom lever.
Mode dial
Note
basic_e_d4197_6.fm Page 13 Thursday, November 20, 2003 7:24 PM
To Next Page
Loading...
