- 2 -
Charging the recorder
1. Slide the USB connector slide lever in the
direction of the arrow. The USB connector
will extend out.
2. Connect the extension cable to this and the other end to a USB port on
your PC or a plug adapter. You can connect the recorders USB
connector directly to a computer port, however this is not recommended.
3. Press the OK button to start
charging the battery.
4. Charging has finished when the battery indicator
changes to display [F]. The approximate charging
time is 3 hours.
Switching it on
While the recorder’s power is off, slide the
POWER/HOLD switch in the direction indicated
by the arrow.
To turn off the recorder, slide the POWER/HOLD
switch in the direction of the arrow and hold it for
1 second before release.
To Next Page
Loading...
