Document last modified: 19 July 2012 (RP)
Configuring Software Manually
DS-3500/DS-7000 – ODMS R6 Dictation Module (Authors)
Open the ODMS R6 Dictation Module software (Start – All Programs – Olympus Dictation Management
System – Dictation Module).
If the “First Start Wizard” opens, click on “Skip Wizard”.
Go to “Tools – Options” and click on the Tabs shown below. Note that the settings shown are commonly
configured options, and are not necessarily applicable in your environment.
Folder Design Tab:
Use this tab to set the Properties for each Folder.
In the left column, click on the Folder whose Properties you wish to change.
Properties are displayed and modified in the right pane of this window.
Set “Auto Download” to “yes”, so that files will be downloaded automatically when the DVR is connected.
Files recorded in Folder A on the DVR, will be downloaded to Folder A in the software, Folder B to
Folder B etc., unless you set the “Advanced Download” option (see page 8).
The “Path” is where the files will be downloaded/saved. Change this by browsing to the appropriate
folder location for Folder A. If you are using the simple Folder Structure, as noted on page 1, the
location will be \\server1\Dictation\FolderA (where “Server1” is the name of your company’s Server).
Select each Folder in turn and set the Properties as required.
This screen shot shows “Folder A” Properties.
To Next Page
Loading...
