150
Changing
the
ISO
sensitivity
AUTO
Sensitivity
is
automatically
adjusted
according
to
the
conditions
of
the
subject.
64/100/200/4001 A
low
value
lowers
the
sensitivity
for
daylight
shooting
of
clear,
sharp
800/1600/3200
pictures.
The
higher
the
value,
the
better
the
camera's
light
sensitivity
and
ability
to
shoot
with a
fast
shutter
speed
and
in
low
light
conditions.
However,
high
sensitivity
introduces
noise
into
the
resulting picture,
which
may
give
it a
grainy
appearance.
• When [3200] is selected, [IMAGE SIZE] is limited to IIlM)]
or
lower.
FINE ZOOM
Zooming
in
on
your
subject
without
reducing
image
quality
OFF
ION
Combines optical zoom and image capture to enable greater magnification (Max. 15x (FE-320/X-835/C-540)/
Max. 25x (FE-340/X-855/C-560)). There
is
no deterioration
in
the image quality since data conversion (by
increasing pixel resolution) is not performed.
• The available magnification varies depending on the [IMAGE SIZE] setting.
• The available [IMAGE SIZE] setting is
[]M)] or lower.
~
(still
pictures)
Recording
sound
with
still
pictures
OFF
ION
PANORAMA
Creating
a
panoramic
picture
Panorama shooting lets you create a panoramic picture, using the OLYMPUS Master software on the
provided CD-ROM.
An
Olympus xD-Picture Card is required for panorama shooting.
When activated [ON], the camera will record about 4 seconds of
audio after the picture is taken.
When recording, aim the camera microphone at the source of
the sound you want to record.
s:
CD
::J
C
o
""0
CD
tu
~
o
::J
en
Microphone
Connects
pictures
from
bottom
to
top
b..:
The next picture is
connected at the top.
\l:
The next picture is
connected at the
bottom.
I
I
I
r
•
I
I
I
-
;-
t>:
The next picture is
connected at the
-~
~-
right edge.
<1:
The next picture is
connected at the left
edge.
'-- '--
Connects
pictures
from
left
to
right
Use the arrow pad to specify at which edge you want to connect the pictures; and then compose your shots
so that the edges of the pictures overlap. The part of the previous picture where it will be joined to the next
picture does not remain
in
the frame. You have to remember what the part
in
the frame looked like and take
the next picture so it overlaps.
To Next Page
Loading...
