SETUP
menus
Shooting
mode
Playback
mode
SETUP
MEMORY FORMAT
(FORMAT')
BACKUP'
•
.G)
PIXEL MAPPING
O/[B
PWON
SETUP
MENU COLOR
SOUND SETTINGS
101
_
....
e)
VIDEO OUT
POWER SAVE
~~[3B@
•
EXIT.!!!!!
SET.[illg
* A card is required.
• The factory default settings are displayed
in
gray (
).
MEMORY FORMAT (FORMAT)
Formatting
the
internal
memory
or
card
All existing data, including protected pictures, are erased when the internal memory
or
card is formatted
(images registered to "My Favorite" are not erased). Make sure that you save or transfer important data to a
computer before formatting.
• Make sure there is no card inserted in the camera when formatting the internal memory.
• Be sure that the card is inserted in the camera when formatting the card.
• Before using non-Olympus cards
or
cards which have been formatted
on
a computer, you must format them
with this camera.
BACKUP
Copying
pictures
in
the
internal
memory
to
the
card
Insert the optional card into the camera. Copying data does not erase the picture
in
the internal memory.
• It takes some time to back up data. Check that the battery
is
charged before starting the copy.
•
...!~
Selecting
a
display
language
You can select a language for on-screen display. Available languages vary depending on where you
purchased this camera.
You can add other languages to your camera with the provided OLYMPUS Master software.
~
(1)
::::J
C
o
"'0
(1)
.,
Q)
.....
o
::::J
C/)
PIXEL MAPPING
Adjusting
the
image
processing
function
The pixel mapping feature allows the camera to check and adjust the CCD and image processing functions.
It is not necessary to operate this function frequently. Approximately once a year is recommended. Wait at
least one minute after taking or viewing pictures to allow the pixel mapping function to perform properly. If you
turn the camera
off
during pixel mapping, start again.
Select [PIXEL MAPPING]. When [START] is displayed, press
~.
Q/[E]
Turning
on
the
camera
with
the
0
or
(E]
button
YES
• Pressing 0 turns on the camera and starts the camera in the shooting
mode.
• Pressing
[B
turns on the camera and starts the camera
in
the playback
mode.
NO
The power
is
not turned on. To turn
on
the camera, press
POWER
button.
29
----------------------EN
To Next Page
Loading...
