IBlurry images cannot be stabilized
Even
if
[DIS EDIT] is selected, not all blurry pictures can be fixed.
•
If
the
shutter
speed
is
low,
if
the
camera
is
severely
shaken,
if
the
flash
has
fired,*
and/
or
if
[SMILE
SHOT]
is
used
*:
The
recorded
picture
may
not
be
stabilized
or
cannot
acquire
the
proper
stabilization
effect.
*
FE-320/X-835/C-540
only.
•
Moving
object:
The
image
cannot
acquire
the
proper
stabilization
effect.
In
addition, the digital image stabilization mode cannot be activated when:
•
the
internal
memory
capacity
or
the
card
capacity
is
insufficient.
•
the
image
was
extracted
from
a
movie,
modified
using
a
computer,
edited
on
the
camera,
or
created
with
another
camera.
IThe red-eye cannot be fixed
• Depending on the picture, the red-eye may not be fixed. Also, parts except the eye may be fixed.
Bright specks appear
in
the picture
• Light reflecting from dust and other particles
in
the air at night may appear as bright specks
in
pictures taken using the flash.
Playing back pictures
in
the internal memory
• When a card has been inserted
in
the camera, the pictures in the internal memory cannot be played
back. Pull out the card before operating the camera.
IViewing picture information
• Play back a picture, and press
DISP.l6.
Press
DISP.l6
repeatedly to change the amount
of
information displayed.
~
"DISP.l6
button Changing the information on display/Display the menu guide" (P. 18)
Quickly displaying a desired picture
• Turn the zoom lever to the W-side to display the pictures as thumbnails (index display).
~
"Zoom lever Zooming while shooting/Close-up playback" (P. 16)
Erasing sound recorded to still pictures
• Once sound is added to a picture, it is not possible to erase the sound.
In
this case, make a re-
recording with silence.
~
"~Adding
sound to still pictures" (P. 28)
G)
CD
......
~
:::::l
<0
......
o
"
:::::l
o
~
'<
o
c
...,
("')
III
3
CD
...,
III
0-
CD
......
......
CD
...,
Viewing the entire picture on a computer screen
The size
of
the picture displayed on a computer screen changes depending on the computer settings. When
the monitor setting is 1,024
x 768 and you are using Internet Explorer to view a picture with an image size
of
2,048 x 1,536 at 100%; the entire picture cannot be viewed without scrolling. There are several ways you can
view the entire picture on the computer screen.
View the picture using image browsing software
• Install the OLYMPUS Master 2 software from the provided CD-ROM.
Change the monitor setting
• The icons on the computer desktop may be rearranged. For details on changing the settings on your
computer, refer to the computer's instruction manual.
EN
41
To Next Page
Loading...
