H Note
• Do not open the battery/card compartment cover while the
card access lamp is blinking, as the lamp is indicating that it
is reading
or
writing data. Doing so may damage the data in
the internal memory or the card and render the internal
memory or card unusable.
Safety
Precautions
Card access lamp
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL.
~
~
DANGER
~
WARNING
~
CAUTION
An exclamation mark enclosed in a triangle alerts you to important operating and
maintenance instructions in the documentation provided with the product.
If the product is used without observing the information given under this symbol, serious
injury or death
may
result.
If the product is used without observing the information given under this symbol, injury or
death may result.
If
the product is used without observing the information given under this symbol. minor
personal injury, damage to the equipment,
or
loss
of
valuable data may result.
WARNING!
TO
AVOID
THE
RISK
OF FIRE OR
ELECTRICAL
SHOCK, NEVER DISASSEMBLE, EXPOSE THIS PRODUCT
TO
WATER
OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT.
G.eneralPrecautions
Read
All
Instructions
- Before you use the product, read all operating instructions. Save all
manuals and documentation for future reference.
Cleaning
- Always unplug this product from the wall outlet before cleaning. Use only a damp cloth
for cleaning. Never use any type
of
liquid or aerosol cleaner,
or
any type
of
organic solvent to clean
this product.
Attachments
- For your safety, and to avoid damaging the product, use only accessories
recommended by Olympus.
Water
and
Moisture
- For precautions on products with weatherproof designs, read the
weatherproofing sections.
Location
- To avoid damage to the product, mount the product securely on a stable tripod, stand,
or
bracket.
Power
Source
- Connect this product only to the power source described on the product label.
Foreign
Objects
- To avoid personal injury, never insert a metal object into the product.
To Next Page
Loading...
