Monitor indication Possible cause Corrective action
There is a problem with the Use image processing software to view the
_--_ picture picture on a computer, cannot
selected and it If that be
PICTURE ERROR cannot be ptayed back on done, the image file is damaged.
this camera.
_--_ Pictures taken by other Use image processing software to edit the
cameras, or previously pictures.
THE IMAGE edited or corrected pictures
CANNOT BE cannot be edited or fixed.
EDITED
The battery/card Ctose the battery/card compartment cover.
compartment cover is open.
CARD-COVER
OPEN
Charge the battery.
BATTERY EMPTY
The battery is empty.
The card is not being
recognized by the camera.
Or, the card is not formatted.
• Select [CLEAN CARD], and press [].
Remove the card and wipe the contact
area with a soft, dry cloth.
• Select [FORMAT] P, [YES] and press
[]. All data on the card is erased.
Select [MEMORY FORMAT] _" [YES] and
press _. All data in the internal memory is
erased.
There is an error in the
internal memory.
The camera is not Disconnect the camera and connect it
connected to the computer again correctly.
NO CONNECTION or the printer correctly.
There is no paper in the Load some paper into the printer.
printer.
NO PAPER
The printer has run out of Replace the ink cartridge in the printer.
ink.
NO INK
8,f_ The paper is jammed. Remove the jammed paper.
JAMMED
The printer's paper tray has Do not operate the printer while changing
SETTINGS been removed or the printer settings on the camera.
CHANGED has been operated while
changing settings on the
camera.
There is a problem with the Turn off the camera and printer. Check theprinter and/or camera, printer and remedy any problems before
PRINT ERROR turning the power on again.
_--_ Pictures recorded on other Use a computer to print.
cameras may not be printed
CANNOT PRINT on this camera.
6")
6
O
c
O
B
EN45
To Next Page
Loading...
