Olympus Magna-Mike 8600 - 6 Configuring the Instrument; Configuring Measurement Parameters; Figure 6-1 the MEASUREMENT SETUP Screen

DMTA-10026-01EN, Rev. D, January 2015
Configuring the Instrument 103
6. Configuring the Instrument
This chapter describes how to configure instrument parameters for measurement,
system setup, and communications.
6.1 Configuring Measurement Parameters
The MEAS setup is the most commonly used setup menu screen where you access
global parameters concerning the instrument measurement features.
To configure measurement parameters
1. In the measurement screen, press [SET UP], and then select MEASUREMENT to
display the MEASUREMENT SETUP screen (see Figure 6-1 on page 103).
Figure 6-1 The MEASUREMENT SETUP screen