DMTA-10026-01EN, Rev. D, January 2015
Chapter 7
124
Figure 7-9 Opening a file
7.3.2 Copying a File
You can duplicate a file that already exists in the datalogger. The file copy function is
useful when you need to create a new file with the exact same ID number structure as
a previously created file. You can also choose to copy the thickness data.
The file copy only allows you to copy an existing file within the internal memory. Use
the file EXPORT function to copy data between the internal memory and the
removable microSD card.
To copy a file
1. In the measurement screen, press [FILE], and then select COPY.
2. In the FILE COPY screen (see Figure 7-10 on page 125), highlight the desired
source file in the list, and then press [ENTER].
a) In the COPY NAME field, enter the name of the destination file.
b) Set COPY THICKNESS DATA? to YES when you want to also copy the
thickness readings from the original file into the new file.
3. Select COPY to return to the measurement screen.
To Next Page
Loading...
