DMTA-10026-01EN, Rev. D, January 2015
Using the Datalogger
133
To generate a report
1. In the measurement screen, press [FILE], and then highlight REPORTS.
2. In the REPORTS submenu, select the desired type of report.
3. If you select FILE SUMMARY, go to step 4.
OR
If you select MIN/MAX SUMMARY, go to step 5.
4. In the FILE SUMMARY screen (see Figure 7-17 on page 133):
a) Select the file for which you want to create the report.
b) Select REPORT to display the FILE SUMMARY report result screen (see
Figure 7-18 on page 134).
Figure 7-17 The FILE SUMMARY screen
To Next Page
Loading...
