DMTA-10026-01EN, Rev. D, January 2015
Managing Communications and Data Transfer
141
Figure 8-3 The COMMUNICATIONS SETUP screen — RS-232
5. Using the appropriate RS-232 cable (see Table 16 on page 140), connect the
Magna-Mike 8600 to the remote serial communication device.
6. If needed, on the remote serial communication device, start the serial
communication program.
7. Press [MEAS] to return to the measurement screen.
If you experience problem to establish the communication between the Magna-
Mike 8600 and a remote device, consider using the Magna-Mike 8600 communication
reset function to return all communication parameters to the default values (see
“Resetting the Communication Parameters” on page 148) and reconfigure only
needed communication parameters.
8.4 Exchanging Data with a Remote Device
You can exchange Magna-Mike 8600 data with a remote device such as a computer.
To Next Page
Loading...
