DMTA-10026-01EN, Rev. D, January 2015
Appendix A
156
A.2 Input/Output Specifications
Table 21 on page 156 provides the specifications for the input output signals.
Table 22 on page 157 describes all the connections available on the RS-232 9-pin D-sub
connector. Table 23 on page 157 describes all the connections available on the VGA
Out 15-pin connector.
Display dimensions
(W × H, Diagonal)
117.4 mm × 88.7 mm, 146.3 mm
(4.62 in. × 3.49 in., 5.76 in.)
Warranty Two-year limited
Table 20 Environmental ratings specifications
Parameter Va lu e
IP rating Designed to meet requirements of IP67
Drop tested MIL-STD-810G, Method 516.6, Procedure IV
Shock tested MIL-STD-810G, Method 516.6, Procedure I
Vibration tested MIL-STD-810G, Method 514.6, Procedure I
Operating temperature
−10 °C to 50 °C
Battery storage temperature 0°C to 50°C
Table 21 Input/output specifications
Parameter Va lu e
USB ports One USB 2.0 peripheral port
Video output One standard VGA analog output port
RS-232 One RS-232 Port: selectable baud rate, stop bits, and parity
fixed word length (eight data bits), and fixed flow control (none)
Table 19 General specifications (continued)
Parameter Val ue
To Next Page
Loading...
