Olympus Magna-Mike 8600 - Table 28 Balls, Disks, and Wires on Fixtures

DMTA-10026-01EN, Rev. D, January 2015
Appendix B 162
Table 28 Balls, disks, and wires on fixtures
Description Part number
Calibration fixture, ball 1.59 mm (1/16 in.), 86PR-1, and 86PR-2
probes
80CAL-TB1 [U8771019]
Calibration fixture, ball 3.18 mm (1/8 in.), 86PR-1, and 86PR-2
probes
80CAL-TB2 [U8771020]
Calibration fixture, ball 4.76 mm (3/16 in.), 86PR-1, and 86PR-2
probes
80CAL-TB3 [U8771021]
Calibration fixture, ball 6.35 mm (1/4 in.), 86PR-1, and 86PR-2
probes
80CAL-TB4 [U8771022]
Wire on fixture for 86TW1 and 86TW2 targets and 86PR-1 and
86PR-2 probes
86CAL-TW1 [U8771048]
Disk on fixture for 80TD1 and 80TD2 86CAL-TD [U8771042]
Calibration fixture for 1.59 mm (1/16 in.) ball and 86PR-3 probe 86CAL-PR3-TB1
Calibration fixture for 3.18 mm (1/8 in.) ball and 86PR-3 probe 86CAL-PR3-TB2
Calibration fixture for 0.66 mm (0.026 in.) wire and 86PR-3 probe 86CAL-PR3-TW2
Table 29 Calibration fixtures for 86PR-1 and 86PR-2 probes
Description Part number
Calibration fixture 0.25 mm (0.010 in.) 80CAL-010 [U8771003]
Calibration fixture 0.51 mm (0.020 in.) 80CAL-020 [U8771004]
Calibration fixture 1.02 mm (0.040 in.) 80CAL-040 [U8771005]
Calibration fixture 2.03 mm (0.080 in.) 80CAL-080 [U8771006]
Calibration fixture 4.06 mm (0.160 in.) 80CAL-160 [U8771007]
Calibration fixture 6.10 mm (0.240 in.) 80CAL-240 [U8771008]
Calibration fixture 7.62 mm (0.300 in.) 80CAL-300 [U8771009]
Calibration fixture 9.14 mm (0.360 in.) 80CAL-360 [U8771010]
Calibration fixture 12.70 mm (0.500 in.) 86CAL-500 [U8771049]
Calibration fixture 15.88 mm (0.625 in.) 86CAL-625 [U8771050]
Calibration fixture 19.05 mm (0.750 in.) 86CAL-750 [U8771051]
Calibration fixture 22.23 mm (0.875 in.) 86CAL-875 [U8771052]
Calibration fixture 25.40 mm (1.00 in.) 86CAL-1000 [U8771053]
Calibration fixture for target disk 0.25 mm (0.010 in.) 86DCAL-010 [U8771061]