DMTA-10026-01EN, Rev. D, January 2015
Accessories and Replacement Parts
163
Calibration fixture for target disk 0.51 mm (0.020 in.) 86DCAL-020 [U8771062]
Calibration fixture for target disk 1.02 mm (0.040 in.) 86DCAL-040 [U8771063]
Calibration fixture for target disk 2.03 mm (0.080 in.) 86DCAL-080 [U8771064]
Calibration fixture for target disk 4.06 mm (0.160 in.) 86DCAL-160 [U8771065]
Calibration fixture for target disk 6.10 mm (0.240 in.) 86DCAL-240 [U8771066]
Calibration fixture for target disk 9.14 mm (0.360 in.) 86DCAL-360 [U8771067]
Calibration fixture for wire targets 0.25 mm (0.010 in.) 86WCAL-010 [U8771055]
Calibration fixture for wire targets 0.51 mm (0.020 in.) 86WCAL-020 [U8771056]
Calibration fixture for wire targets 1.02 mm (0.040 in.) 86WCAL-040 [U8771057]
Calibration fixture for wire targets 2.03 mm (0.080 in.) 86WCAL-080 [U8771058]
Calibration fixture for wire targets 4.06 mm (0.160 in.) 86WCAL-160 [U8771059]
Calibration fixture for wire targets 6.10 mm (0.240 in.) 86WCAL-240 [U8771060]
Calibration fixture for wire targets 9.14 mm (0.360 in.) 86WCAL-360 [U8771072]
Calibration fixture for wire targets 12.70 mm (0.500 in.) 86WCAL-500 [U8771073]
Table 30 Calibration fixtures for 86PR-3 probe
Description Part number
Calibration fixture 0.25 mm (0.010 in.) 86CAL-PR3-010 [Q7800007]
Calibration fixture 0.51 mm (0.020 in.) 86CAL-PR3-020 [Q7800008]
Calibration fixture 1.02 mm (0.040 in.) 86CAL-PR3-040 [Q7800009]
Calibration fixture 2.03 mm (0.080 in.) 86CAL-PR3-080 [Q7800010]
Calibration fixture 4.06 mm (0.120 in.) 86CAL-PR3-120 [Q7800011]
Calibration fixture 4.06 mm (0.160 in.) 86CAL- PR3-160 [Q7800012]
Table 31 Calibration kits
Description Part number
8600 Standard Calibration kit. Includes the plastic case, 80CAL-
TB1, 80CAL-TB2, 80CAL-TB3, 80TB1, 80TB2, 80TB3, 80CAL-010,
80CAL-020, 80CAL-040, 80CAL-080, 80CAL-160, 80CAL-240, and
80CAL-300.
86ACC-KIT [U8771068]
Table 29 Calibration fixtures for 86PR-1 and 86PR-2 probes (continued)
Description Part number
To Next Page
Loading...
