Olympus Magna-Mike 8600 - Editing Text Parameters Using the Virtual Keyboard; Figure 2-5 the Virtual Keyboard

DMTA-10026-01EN, Rev. D, January 2015
Software User Interface Elements 49
In the remainder of this document, the above procedure is summarized by simply
stating to select a specific parameter or list, and its value. For example,
“In the MEASUREMENT screen, set RESOLUTION to STANDARD.”
2.4 Editing Text Parameters Using the Virtual Keyboard
When the text edit mode is displayed, the virtual keyboard appears when you select
an alphanumeric parameter (see Figure 2-5 on page 49).
Figure 2-5 The virtual keyboard
To edit an alphanumeric parameter value using the virtual keyboard
1. Select an alphanumeric parameter.
The virtual keyboard appears.
2. Press [], [], [], and [] to highlight the character that you wish to enter, and
then press [ENTER].
The selected character appears in the parameter value text box and the cursor
moves to the next character position.
3. Repeat the previous step to enter other characters.
NOTE
Help text bars
Title bar
Selected alphanumeric
parameters
Virtual keyboard
Parameter value text
box