Olympus OM-1 - Page 26

5.
Improper
timing
at
high
shutter
speeds:
1)
Adjustment
of the
Eccentric
Screw
If the
speed
at 1/1000
- 1/60
sec.
is in average
longer
(or
shorter)
than the proper timing, and adjustment is to be made with A
of 8556 (Lever).
Checkup
Refer to the Inspection Standard for the proper timing and make measure-
ments with the shutter tester.
(For reference - Shutter Release
8592 releases the Gear A.
1st curtain starts the run.
The Cam of the Gear A is pressed.
The Lever of 8556 is worked.
The Claw of 8567 engages the Gear B
Znd curtain starts the run.