Quick Start Guide

TRANSFER IMAGES

a. Install the software

1 Insert the OLYMPUS Master

CD-ROM.

2 Windows: Click the

“OLYMPUS

Master“ button.

Macintosh: Double-click the

“Installer“ icon.

3 Simply follow the on-screen instructions.

Remember to register your camera when you install OLYMPUS

Master or visit:

www.olympusamerica.com/prodreg

b. Connect the camera to the computer

c. Transfer images to the computer

1 Connect the camera and computer using the USB cable (included).

The monitor will turn on automatically.

2 Select [PC] on the monitor, and press o.

Your PC will now recognize your camera as a

removable storage drive.

USB cable

1 With the camera now connected,

open OLYMPUS Master.

The [Transfer Images] window is

displayed.

2 Select the images you want to

transfer, and click the [Transfer

Images] button.

[Transfer Images] window

[Transfer Images] button

b. Click the “From Camera” icon.

a. Click the “Transfer Images” icon

on the OLYMPUS Master main

menu.

If the [Transfer Images] window is not

displayed automatically:

REVIEW OR ERASE A PICTURE

a.Select the playback mode b. Take a closer look

Zoom Button

1 Press the q button.

The last picture taken will be displayed.

Press T or W to zoom in

or out.

Press o to return to

the original size.

Press the K/h/s button to

return to the shooting mode.

Press 12 or 43 to

scroll around.

q Button

Prev. Picture

Next Picture

c. To erase a picture

1 Display the picture you

want to erase.

Select the single-frame

playback. A single

image cannot be erased

while the close-up

playback/index

playback is operated.

2 Press the 2Y/S

button.

3 Select [YES], and press

The picture is

permanently erased.

2Y/S Button

GET STARTED

a. Attach the strap

Pull the strap tight so that it does

not come loose.

Strap

b. Insert the battery

1 Slide

2 Lift

3 Insert

Battery

lock knob

c. Set the date and time

1 Press o button to turn the camera on.

2 Press m button to display the top menu,

and select [SETUP] > [X].

3 Press 12 to set an item. Press 43 to select

the next field.

o Button

m Button

Operation

guide

Date format

BEFORE YOU BEGIN

Gather these items (box contents)

Digital Camera Strap LI-42B Lithium Ion Battery

USB Cable AV Cable

OLYMPUS Master

Software CD-ROM

Items not shown: Advanced Manual (CD-ROM), Basic Manual, warranty card.

Contents may vary depending on purchase location.

LI-40C Battery Charger

Charge the battery (recommended*)

AC Wall Outlet

Power Cable

*Battery comes partially charged.

Red light on: Charging

Light off: Charging complete

(Charging time: Approx. 300 minutes)

Charging Indicator

LI-42B Lithium Ion

Battery

LI-40C Battery

Charger



Start Here

CAMERA DIAGRAM

Self-Timer Lamp

Shutter Button o Button

Flash

Lens

Zoom Button

Speaker

Arrow Pad (1243)

o Button (OK/FUNC)

Strap Eyelet

Battery Compartment/Card CoverTripod Socket

Connector Cover

Multi-Connector

m Button (MENU)

Monitor

Microphone

< Button (Print)

q Button

K/h/s Button

For more information, please refer to the Basic & Advanced

Manuals or visit: www.olympusamerica.com/support

VH409801

TAKE A PICTURE

a. Zoom

Zoom Out: Zoom In:

c. Take the pictureb. Focus

1 Press the shutter

button completely to

take the picture.

(Pressed Completely)

Shutter Button

1 Using the monitor, place the AF target

mark over your subject.

2 Press and hold the shutter button halfway

to lock the focus.

The green lamp indicates the focus is locked.

Green Lamp

AF Target Mark

(Pressed Halfway)

Shutter Button

Pictures are recorded in

the internal memory.

Pictures can also be

recorded to an optional

xD-Picture Card (It is

called just “card” in the

attached instruction

manual.)

d4256_qsg_e_7.fm Page 1 Tuesday, January 17, 2006 12:05 PM

Olympus Stylus 720 SW - Page 80

Table of Contents

Other manuals for Olympus Stylus 720 SW

Related product manuals