34
EN
Using shooting options (Set by direct button)
Frequently used functions are assigned to IFG (arrow pad). Just by pressing
the button, you can select the assigned function directly.
Some items are not available in some shooting modes. g “List of settings
available in each shooting mode” (P. 106)
Flash
You can use a flash when shooting.
1
Press the # button to
display options.
2
Use HI (arrow pad)
to choose a flash mode
and press A.
Flash Auto
MENUMENU
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
16
M
4:3
1080
#
AUTO
Auto flash
The flash fires automatically in low light or
backlight conditions.
!
Red-eye
reduction flash
This function allows you to reduce the red-
eye phenomenon.
#
Fill-in flash
The flash fires regardless of the light
conditions.
$
Flash off The flash does not fire.
#
RC
Remote Control
The dedicated underwater strobe or the
Olympus wireless RC flash is used to take
pictures. For details, see “Using a dedicated
underwater strobe” (P. 103).
#
SLV
Slave
The commercially-available slave flash that is
synchronized with the camera flash is used
for taking pictures. The flash intensity setting
can be adjusted.
4
LED On
The LED turns on when a picture is taken.
This is effective for taking close up pictures.
• In [!](Red-eye reduction flash), after the pre-flashes, it takes about
1 second before the shutter is released. Do not move the camera until
shooting is complete.
• [!](Red-eye reduction flash) may not work effectively under some
shooting conditions.
• When [Remote Flash] (P. 47) is set to [Off], [#RC] and [#SLV] cannot be
selected.
• Some items are not available in some shooting modes.
To Next Page
Loading...
