Olympus TG-1 - Using the flash

20
EN
Using the fl ash
The fl ash functions can be selected to best match the
shooting conditions.
1
Select the fl ash option in the function menu.
0.00.0
MENUMENU
12M
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
Flash Auto
2
Use HI to select the setting option, and
press the A button to set.
Option Description
Flash Auto
The fl ash fi res automatically in low-
light or backlight conditions.
Redeye
Pre-fl ashes are emitted to reduce
the occurrence of red eye in your
photos.
Fill In
The fl ash fi res regardless of the
available light.
Flash Off Flash Off
Remote Control For details, see “Taking pictures with
the Olympus Wireless RC Flash
System” (p. 67).
Slave
[Remote Control] and [Slave] are not displayed when
[Remote Flash] (p. 38) is set to [Off].
Changing the shooting information
display
The display of the screen information can be changed to
best match the situation, for example, the need for a clear
view of the screen or for making a precise composition by
using the grid display.
1
Press F (INFO).
●
The displayed shooting information changes in
the order shown below each time the button is
pressed.
PP
PP
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
12 M
zz
44
N ORM
0:340:34
Date
GPS
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
12 M
44
N ORM
0:340:34
Date
GPS
Normal
No information
Detailed
Reading a histogram
Reading a histogram
If the peak fi lls too much of the frame, the
image will appear mostly white.
If the peak fi lls too much
of the frame, the image
will appear mostly black.
The green section shows luminance
distribution within the screen’s center.