68
EN
5
Select the fl ash option in the function menu,
and then select the remote control.
“Using the fl ash” (p. 20)
6
Take a test shot to check the operation of the
fl ash and the resulting image.
Be sure to check the charge level of the camera and
wireless fl ash before taking pictures.
Although there is no limit on the number of wireless
fl ash units that are set up, usage of a maximum of
three units is recommended to prevent malfunction
due to interference with each other.
When the camera fl ash is set to [#RC], the camera
built-in fl ash is used for communication with the
wireless fl ash. It cannot used for taking pictures.
Use the conversion lens (sold separately)
Conversion lens Converter adapter
Fish Eye converter (FCON-T01)
CLA-T01
Teleconverter (TCON-T01)
To use the conversion lens (sold separately), remove the lens ring which has been attached to the camera and then
attach the converter adapter (sold separately) to the camera.
To attach/remove the lens ring
To attach/remove the lens ring
Marks for attaching
Attach
direction
Remove
direction
Lens ring
To Next Page
Loading...
