PV6088-F4E017
2. CARRYING AND INSTALLATION
2.1.Conditions of installation
(1) Avoid any place that is exposed to direct sunlight, extremely hot (near a heater or a
thermal appliance) or cold, or any humid, dirty or dusty place.
(2) Install it on a flat, stable and solid bench.
(3) Avoid any place exposed to frequent vibration.
(4) Before moving the product to a location having different voltage, it is necessary to
change the voltage configuration of the product. Contact our service department for
assistance.
Input voltage is configured to 100–120 V or 220–240 V, depending
on the shipment destination. There is a label indicating the voltage
setting on the back surface. Use this product within the voltage
range. Otherwise there is a risk of damage or fire. Make sure to
contact our service department when you move it into a place
having a different voltage range.
To Next Page
Loading...
