EasyManua.ls Logo

Olympus VH-410 - Adjusting Shooting Parameters; Exposure Compensation; White Balance Settings; ISO Sensitivity Adjustment

Olympus VH-410
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
EN
Exposure compensation Compensates the brightness (appropriate exposure) adjusted by the camera.
to
Value
Set a larger negative (–) value to adjust darker, or a larger positive (+) value to adjust
brighter.
White balance Sets an appropriate color scheme for the light of the shooting scene.
e
WB Auto
The camera automatically adjusts the white balance.
f
Sunny
Suitable for shooting outdoors under a clear sky.
g
Cloudy
Suitable for shooting outdoors under a cloudy sky.
h
Incandescent
Suitable for shooting under tungsten lighting.
Fluorescent
Suitable for shooting under white uorescent lighting.
One Touch 1
For manually adjusting the white balance according to the light when shooting. Set a piece
of white paper or other white object so that it lls the entire screen, and press the
button to set the white balance.
One Touch 2
ISO sensitivity
*3
Sets the ISO sensitivity.
l
ISO Auto
The camera automatically sets the sensitivity with priority on image quality.
m
High ISO Auto
The camera automatically sets the sensitivity with priority on minimizing blur caused by a
moving subject or by camera shake.
to
Value
Set a smaller value to reduce noise in the picture, or a larger value to reduce blur.
Drive Sets the sequential shooting function.
o
Single
One frame is shot each time the shutter button is pressed.
j
Sequential
The images are taken sequentially while holding down the shutter for up to 200 frames.
c
High-Speed1
The camera takes sequential shots at approximately 1.5 frames/sec.
d
High-Speed2
The camera takes sequential shots at approximately 15 frames/sec.

Other manuals for Olympus VH-410

Related product manuals