g
..
2 Make
the
following
preparations
for
disconnecting
the
USB cable.
Windows
CD
Click the "Unplug or Eject Hardware" icon
'~
in
the system
tray.
(1)
Click the message that is displayed.
@ When a message is displayed saying that the hardware can
be ejected safely, click "OK".
Macintosh
CD
The trash icon changes to the eject icon when the "Untitled"
or "NO_NAME" icon on the desktop is dragged. Drag and
drop it on the eject icon.
3
Disconnect
the
USB
cable
from
the
camera.
U Note
• Windows: When you click "Unplug or Eject Hardware", a warning message may be displayed.
Make sure that image data is not being downloaded from the camera and that all applications
are closed. Click the "Unplug or Eject Hardware" icon again and disconnect the cable.
For
detailed
operations
of
OLYMPUS Master, refer
to
the
quick
start
guide
displayed
upon
startup
or
the
help
of
the
OLYMPUS Master.
To
download
and save
images
to
a
computer
without
using
OLYMPUS
Master
This camera
is
compatible with USB mass storage. You can connect the camera to your computer using the
USB cable provided with the camera to download and save images without using OLYMPUS Master. The
following environment
is
required to use the USB cable to connect the camera to your computer.
Windows:
Windows 2000 Professional/XP Home Edition/XP ProfessionallVista
Macintosh: Mac OS X v10.3 or later
U Note
• If your computer
is
running Windows Vista, you can select [PC]
in
Step 3 on
P.
38, press
t>,
and select [MTP] to use Windows Photo Gallery.
• Data transfer is not guaranteed
in
the following environments, even if your computer is
equipped with a USB port.
• Computers with a USB port added by means
of
an extension card, etc.
• Computers without a factory-installed
as and home-built computers
To
increase
the
number
of
languages
Make
sure
that
your
computer
is
connected
to
the
Internet.
Plug
the USB cable
into
the USB
port
on
the
computer.
Plug
the
other
end
of
the
USB cable
into
the
camera's
USB
connector.
• The camera turns
on
automatically.
• The monitor turns on and the selection screen for the USB connection
is
displayed.
4 Select [PC], and
press
~.
5 In
the
browse
window,
select
"Camera",
then
"Update
Camera/Add
Display
Language".
• The confirmation window for updating is displayed.
Please take care that your battery
is
fully charged!
1
2
3
To Next Page
Loading...
