Omega National Products Corner Appliance Garage User Manual (English)

To Next Page

Corner Appliance Garage

Important Notes

• Always read the instructions completely and carefully before beginning assembly.

• Remove and check contents for damage and/or missing parts. Keep the original cartons and packing

materials, which are required for any authorized adjustment by our dealers.

• These instructions are for reference only. Make sure installation procedures comply with all applicable

building codes in your area.

Parts

Form OME-078, 03/2009

©Omega National Products

Left Panel

End Panel Tenon and Mortise

Face Frame Assembly

Tambour Door

Right Panel

Quality Features

1. Complete self-contained kit.

2. Solid wood face frame construction.

3. End panels, veneer covered, with mounting cleats.

4. Omega National’s quality tambour door.

5. Spring tension track system.

6. Track system and door are PRE MOUNTED.

7. Kit comes sanded, ready to ﬁnish.

8. Boxed individually, 12 lbs. per carton.

9. Available in Red Oak, Maple, Hickory, Cherry, & Alder.

Need help?

Do you have a question about the Omega National Products Corner Appliance Garage and is the answer not in the manual?

Omega National Products Corner Appliance Garage Specifications

General

Verify all required components are present before starting assembly.

Instructions for measuring and trimming end panels to fit cabinet dimensions.

Guidance on measuring and trimming the face frame to match cabinet height.

Steps for positioning the assembled unit under the upper cabinet and aligning.