Omega 1310 - CLEANING INSTRUCTIONS

1973
Cal. 1310
15
CLEANING INSTRUCTIONS
4.4.1.0.
Motor module 1310.9200.
Do not disassemble or clean motor module in
baths.
Standard exchange if necessary.
4.5.1.0.
Electronic module 1310.9100.
Do not disassemble or clean electronic module in
baths.
Standard exchange if necessary.
4.6.10.0.
Date indicator driving wheel 1310.9062.
Date Maltese cress 1310.9064.
The cleaning machine is not recommended for
these magnetic components. They should be
cleaned in the appropriate benzine bath which
must be absolutely clean and free from any
metallic particles. Check, however, the cleanliness
of the magnets.
4.6.13.0.
Minute wheel 1310.9020.
Important : NEVER clean minute wheel in the
cleaning machine. Proceed as indicated under
4.6.10.0.
Furthermore, the following should not be cleaned
in the baths
Day disc 1310.9967.
Date indicator 1310.9066.
Power cell 9903.
Upper magnetic protection 1310.9230.
The remainder of the movement, including the
motor eccentric 1310.9227 left on the plate
(only remove it in case of replacement) may be
cleaned in baths as per the usual procedure.