PLATINUM
TM
Series User’s Guide
7.3 Outputs
Non-Isolated, Proportional 0–10 Vdc or 0–20 mA; 500 Ω max. Programmable
for control or retransmission. Accuracy is 0.1% of full scale.
Non-Isolated; 10 Vdc at 20 mA
Single pole, single throw mechanical relay, 250 Vac or 30 Vdc at 3 A (Resistive
Load)
Single pole, double throw mechanical relay, 250 Vac or 30 Vdc at 3 A
(Resistive Load)
20–265 Vac at 0.05–0.5 A (Resistive Load); continuous
7.4 Communications (USB Standard, Optional Serial and Ethernet)
USB: Female Micro-USB, Ethernet: Standard RJ45, Serial: Screw terminals
Standards Compliance IEEE 802.3 10/100 Base-T Auto-switching, TCP/IP, ARP,
HTTPGET
Software Selectable RS/232 or RS/485. Programmable 1200 to 115.2 K baud.
Omega ASCII, Modbus ASCII / RTU
7.5 Isolation
UL, C-UL, and CE (8. Approvals Information)
• 2300 Vac per 1 min test
• 1500 Vac per 1 min test (Low-Voltage/Power Option)
Power to Relays/SSR
Outputs
Relays/SSR to
Relay/SSR Outputs
RS-232/485 to
Inputs/Outputs
7.6 General
4-digit, 9-segment LED; red, green, and amber programmable colors for process
variable, Setpoint, and temperature units
• 10.2 mm (0.40"): 32Pt, 16Pt, 16DPt (Dual Display)
• 21 mm (0.83"): 8Pt
•
21 mm (0.83”) and 10.2 mm (0.40”): 8DPt (Dual Display)
8Pt Series: 48 H x 96 W x 127 mm D, (1.89 x 3.78 x 5")
• 16Pt Series: 48 H x 48 W x 127 mm D, (1.89 x 1.89 x 5")
• 32Pt Series: 25.4 H x 48 W x 127 mm D, (1.0 x 1.89 x 5")
• 8Pt Series: 45 H x 92 mm W (1.772" x 3.622"), 1/8 DIN
• 16Pt Series: 45 mm (1.772") square, 1/16 DIN
•
32Pt Series: 22.5 H x 45 mm W (0.886" x 1.772"), 1/32 DIN
Conditions
All Models: 0–50°C (32–122°F), 90% RH non-condensing
Omega Engineering | www.omega.com