Need help?Do you have a question about the Omega CT5000 and is the answer not in the manual?
General| Brand | Omega |
|---|---|
| Model | CT5000 |
| Category | Voice Recorder |
| Language | English |
Describes the LED display for process values and blanking options for programming.
Details the instrument's relay control outputs for on-off control capability.
Explains optional alarm output relays, their configuration, and reset options.
Covers the optional RS-485 serial port using the MODBUS RTU protocol.
Specifies standard and low voltage power input ranges and identification methods.
Instructions for removing the recorder from its carton and inspecting for shipment damage.
Guidelines for selecting a suitable location and mounting the instrument securely.
Provides guidelines to minimize electrical noise interference during instrumentation wiring.
Details how to make all wiring connections to the instrument via terminal blocks.
Specifies conduit openings and wire routing for minimizing electrical noise.
Instructions for connecting standard and low voltage AC power to the recorder.
Describes how to connect various input types for Pen 1 and Pen 2 to the recorder.
Details wiring for optional alarm output relays for each pen.
Explains connections for the optional communications port to the main board.
Shows wiring diagrams for transmitter power supply connections for one or two transmitters.
Instructions on how to move pens for chart changing and replace the chart paper.
Explains single and dual output control configurations (Heat/Cool, Heat/Heat).
Details reviewing and modifying alarm set points for each input/pen.
Describes latching alarms and the conditions for resetting them.
Identifies jumper positions for selecting input types for Pen 1 and Pen 2.
Outlines how to access and use the Program/Test/Calibration mode for setup.
Describes accessing and performing display, keypad, and relay tests.
Details performing input calibration for various types and ranges using external test equipment.
Explains calibrating pens to the chart and mechanical adjustments for pen arcs.
Provides instructions for obtaining return authorization and submitting warranty or repair requests.
To Next Page
