23
1
2
1
2
Silicone packings are consumables that are recommended to be replaced once
every 6 to 12 months. They are available for purchase through the Customer Service
Center. (The juicer may leak if the product is not assembled properly.)
EXTRACTION PACKING
ASSEMBLY AND DISASSEMBLY OF SILICONE
JUICE CAP PACKING
SEAL PACKING
HOPPER PACKING
CHAMBER PACKING
After cleaning, insert in a way that the
round side of the packing faces outward
while the grid grooves face upward.
Assemble the packing as shown in
the gure.
3 Firmly press the remaining part of the
packing without any folded area.
2 After cleaning, check the top and bottom of
the packing and insert it as if you are hooking
one side.
1 Grab one side and pull it back to detach it.
1 Hold and take out the packing as if
you are pulling it back.
3 Insert the remaining part and press
down the perimeter.
2 After cleaning, insert one side of the
packing rst as if you are hooking it.
To Next Page
Loading...
Need help?
General
