Display Elements:
①
Choose T1.T2 thermocouple types ⑫
Carry out record function
②
Main display ⑬
20 minutes auto power off
③
Main, secondary display reading is T1 or T2 ⑭
Examine recorded reading
④
Secondary display
⑮
Five sections of battery power instruction
⑤
Carry out TC- 0°C calibration function ⑯
Temperature unit
⑥
Main, secondary display maximum reading ⑰
Main display shows time's "year"
⑦
Main, secondary display minimum reading ⑱
Third display shows time's "hour:minute", or
"minute:second"
⑧
Main display carry out alarm function ⑲
Third display
⑨
Main display carry out relative reading , third
display shows relative reference reading
⑳
Third display shows “T1-T2” reading
⑩
Carry out set function Secondary display shows time’s “day”, ”month”
⑪
Hold display reading
Battery power indicator and replacement:
The battery power is expressed by five sections of batteries marks. ( )
When the battery mark shows ( ) and you hear a short buzzing sound, this indicates the battery
power is weak, please immediately close the unit and replace with 4 AAA batteries to ensure the
measuring reading is accurate.
When battery power is lower than normal operation, this will automatically stop the thermometer
operation, and the main display will show BATT and the third display will show LO. Please immediately
turn off the unit and replace the 4 AAA batteries.
.
To replace the batteries please use a screwdriver to open battery cover.
C
H
T1-T2
F
d:m m s
:
h m
:
y
①
②
③
④
⑤
⑥ ⑦
⑧
⑨
⑩
⑪
⑫
⑬
⑭
⑮
K J T E R S N
3
1
21
•
•
•
•
To Next Page
Loading...
