Assembly 5
Assembly 6
Assembly 7
DO NOT place any metal objects into the
hopper. If the drum set is clogged or the
machine stops operating, press the reverse
button 2 to 3 times which will clear the
clogging and press the on button again to
resume normal operation.
Switch the juicer OFF before changing ac -
cessories or touching any moving parts.
Remove the drum set from the main body
by turning the locking clip counter-clock
wise. Pull the auger forward to disassemble
it from the drum set. After juicing wash all
parts in warm soapy water. Do NOT place
any of the juicer accessories in the dish -
washer.
Do NOT run juicer for more than 30 minutes
continuously at any one time.
11
Assembly Instructions
omega-nc800.indd 12
To Next Page
Loading...
Need help?
General
