Omega OMB-DAQ-54 - Page 164

Personal Daq User’s Manual Appendix B, 887095 API Commands B-31
Table 3. Event-Handling Definitions
Transfer Event Definitions -
daqTransferEvent
Transfer Event Wait Mode Definitions -
daqWaitMode
DteAdcData 0 DwmNoWait 0
DteAdcDone 1 DwmWaitForAny 1
DteDacData 2 DwmWaitForAll 2
DteDacDone 3
DteIOData 4
DteIODone 5
Table 4. Hardware Version Definitions
daqHardwareVersion
Definition Value
PersonalDaq56 100H
PersonalDaq55 (Note)
101H
Note: Includes “NE” version.
Table 5. ADC Gain Definitions
Base Unit Combination Parameters Voltage Range
PgainX1 0
- 4 to + 4 V
PgainX2 1
- 2 to + 2 V
PgainX4 16
- 1 to + 1 V
PgainX8 17
- 500 to + 500 mV
PgainX16 18
- 250 to + 250 mV
PgainX32 19
- 125 to + 125 mV
PgainX64 20
- 62.5 to + 62.5 mV
PgainX128 21
- 31 to + 31 mV
PgainX1 + PgainDiv5 0 + 8
- 20 to + 20 V
PgainX2 + PgainDiv5 1 + 8
- 10 to + 10 V
PgainX4 + PgainDiv5 16 + 8
- 5 to + 5 V
PgainX8 + PgainDiv5 17 + 8
- 2.5 to + 2.5 V
PgainX16 + PgainDiv5 18 + 8
- 1.25 to + 1.25 V
PgainX32 + PgainDiv5 19 + 8
- 312 to + 312 mV
PgainX64 + PgainDiv5 20 + 8
- 156 to + 156 mV
PgainX128 + PgainDiv5 21 + 8
- 62 to + 62 mV
PgainDiv5 8
Table 6. Trigger Source Definitions
daqAdcTriggerSource daqEnhTrigSensT
DatsImmediate 0 DetsRisingEdge 0
DatsSoftware 1 DetsFallingEdge 1
DatsSoftwareAnalog 6
DatsDigitalChannel 8 *
DatsFrequency 9 *
DatsPulseCount 10 *
DatsPulseTotalize 11 *
DatsAnalogSELow 12
DatsAnalogSEHigh 13
*
DatsDigitalChannel, DatsFrequency, DatsPulseCount, and DatsPulseTotalize
do not apply to Personal Daq/54.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com