5
SECTION 1 — OMNI GLH, GENERAL LAB HOMOGENIZER
The Omni GLH, General Laboratory Homogenizer is a variable speed,
handheld or post-mounted homogenizer. It combines 700 watt,
28,000 rpm motor with a choice of autoclavable, rotor-stator generator
probes of various diameters. The GLH can also be used with OMNI Tip
plastic probes (A1000SB adapter required).
1.1 SPECIFICATIONS
Motor Speed: 5,000-28,000 rpm
W/ external speed control: 0 - 28,000 rpm
Capacity: 0.03 mL-10 L
Height (motor only): 22 cm (8.5 in)
Weight (motor only): 1.6 kg (56 oz)
Electrical Requirements: 115V, 60 Hz or 220 V, 50 Hz
Standards Approval/Compliance:
220V: CE Certied
1.2 PARTS AND ACCESSORIES
Prior to operation, please remove all parts from the shipping container and
inspect for damaged or missing parts. If any parts are found to be dam-
aged or missing, please contact Omni International at 1-800-776-4431.
The Omni GLH consists of the following:
Description Part Number Quantity
Motor Drive Unit (115V) GLH-01
Motor Drive Unit (220V) GLH-02
Cross Rod S00040 1
Clamp FS1002 1
Tool Kit T1001 1
Instruction Manual H258-GLH 1
Also available, but not supplied with the instrument:
Description Part Number
Stand Assembly* S1000
External Speed Control (115V) SC115
External Speed Control (220V) SC220
Vessel Restraint Disk LT-750
* The stand assembly includes a base plate and a 24” post.
To Next Page
Loading...
