Need help?Do you have a question about the OmniSistem onyxpro 75 and is the answer not in the manual?
General| Power Consumption | 75W |
|---|---|
| Power | 75W |
| Luminous Flux | 6000 lm |
| Beam Angle | 120° |
| Frequency | 50/60Hz |
| IP Rating | IP65 |
| Lifespan | 50, 000 hours |
| Input Voltage | 100-240V AC |
General safety precautions for installation, operation, and maintenance of the device.
Warnings about high voltage, electric shock, and potential health risks associated with the device.
Procedure for installing or replacing gobo discs within the fixture.
Safety and technical requirements for securely mounting the fixture.
Explanation of XLR pinout for DMX signal transmission.
Instructions for connecting multiple fixtures serially using DMX.
Using the device without an external controller.
Controlling the fixture via a DMX controller.
Setting the DMX starting address for individual fixture control.
How to navigate and use the device's control board menu.
Step-by-step guide for safely replacing the device's fuse.
To Next Page