Omron 3F88L-160 - Controller Data Read (RUN, PRGM, SET)

4-19
Address DefaultExplanationNameParameter
area code
1900
to
1BCF
4000 Cam
Programs
for Cams
25 to 32 of
Program status
0: Output OFF
1: Output ON
All 00
25 to 32 of
Bank 1
b7 b0
Cam 26 angle 0 state
Cam 25 angle 0 state
Cam 32 angle 0 state
Cam 25 angle 719 state
Cam 26 angle 719 state
Cam 32 angle 719 state
Address
1900
Address
1BCF
2000
to
2BCF
4000 Cam
Programs
of Bank 2
Same as for bank 1 All 00
3000
to
3BCF
4000 Cam
Programs
of Bank 3
Same as for bank 1 All 00
4000
to
4BCF
4000 Cam
Programs
of Bank 4
Same as for bank 1 All 00
5000
to
5BCF
4000 Cam
Programs
of Bank 5
Same as for bank 1 All 00
6000
to
6BCF
4000 Cam
Programs
of Bank 6
Same as for bank 1 All 00
7000
to
7BCF
4000 Cam
Programs
of Bank 7
Same as for bank 1 All 00
8000
to
8BCF
4000 Cam
Programs
of Bank 8
Same as for bank 1 All 00
Note 1. The 3F88L-160 (16-point type) has an area for storing cam programs for cams 17 to 32, but
the contents of these programs cannot be displayed from the Unit.
Note 2. Even if the resolution is set to 360 divisions per revolution, there is an area for storing the state
of cam angles 360 to 719.
4-3-3 Controller Data Read (RUN, PRGM, SET)
Reads the model and version of the Controller.
H Structure of FINS-mini Command Text (PDU)
MRC SRC
No. of bytes 2 2
“0” “5” “0” “1”
Communications Chapter 4