7-4
7-2 Performance
This section shows the performance values of the Cam Positioner.
Note This performance data is for reference only and cannot be guaranteed.
H Initial Processing Time
The diagram shows the times from when the START input is turned ON and the power supply to the Cam
Positioner is turned ON until cam outputs, RUN outputs, and ERROR outputs are made.
Power supply
RUN output
Cam output
ERROR output
Enabled
Disabled
Data Symbol Standard time
RUN output delay time Td1 2 s max.
Cam output delay time Td2 2 s max.
ERROR output delay time Td3 2 s max.
Appendix Chapter 7
To Next Page
Loading...
