Omron 3F88L-160 - Page 217

7-13
Bank/Func-
tion
POSITION/OFFSPEED/ONData rangeFunctionCam/Parame-
ter
c (c) --- Cam protect --- Protection can be set
or released for each
cam number or for
all cams in a bank
number.
(Factory setting:
“unprotected”)
Protect can be set or
released for each
cam number or for
all cams in a bank
number (Factory
setting
“unprotected”)
d (d) --- Teaching --- Present Resolver
angle can be input
as ON angle data.
Present Resolver
angle can be input
as OFF angle data.
F (f) --- One-direction
function setting
0 to 2 --- 0: One-direction
function disabled
(factory setting)
1: Enabled in
forward direction
2: Enabled in
reverse direction
H (h)
1 Backlash
compensation
enable/disable
setting
0, 1 0: Backlash
compensation
disabled (factory
setting)
1: Backlash
compensation
enabled
---
2 Advance angle
compensation
enable/disable
setting
0, 1 0: Advance angle
compensation
disabled (factory
setting)
1: Advance angle
compensation
enabled
---
3 Output hold 0, 1 0: Output hold
disabled (factory
setting)
1: Output hold
enabled
---
Appendix Chapter 7